EUROPE EN
Article No. 000246

EPUSELF 140/5

Article No. 000246

EPUSELF 140/5 – is a three component cast polymer based on an epoxy resin, including a more special filler combination, which fulfills the highest requirements.

Product Description

Technical Specifications

Documents/Downloads

Product Description

Application

For casting big weldments or cast constructions e.g. machine parts (pillars, machine stands and engine beds) as well as substructures for assemblies strained by vibration e.g. engines, gear, turbines, centrifuges and test rigs to get a higher static and dynamic rigidity.
 

Properties

  • Best possible absorption characteristics 
  • Low thermal conductivity
  • Good rigidity
  • Possibility of “Do-it-yourself”-casting
  • Cast well without compaction

List prices for purchase quantities of:

Quantity

Price per kg in € plus VAT

0 - 500 kg

7,80

501 kg - 1.000 kg

7,60

1.001 kg - 3.000 kg

7,40

Size of trading unit

25 kg (other sizes on request)

Purchase order

Technical Specifications

Density

approx. 2,3 g/cm³

Compressive strength1

> 140 MPa

Flexural strength2

> 35 MPa

Modulus of elasticity

> 33,5 GPa (dynamic2)

> 30,0 GPa (static3)

Thermal expansion coefficient

approx. 18,0 * 10-6 K-1 at 20 °C

Thermal conductivity

approx. 2,7 W/(m*K) at 25 °C

Specific heat capacity

approx. 0,9 J/(g*K) at 25 °C

Thermal diffusivity

approx. 1,3 mm 2/s at 25 °C

Logarithmic decrement

not yet measured 

Wall thickness of cast

> 25 mm

Maximum grain size

5 mm

Mixing ratio

A : B : C = 1,71 : 0,59 : 22,7

Pot life

3 - 4 hours at 20°C

Processing temperature

15 – 25 °C

Curing Time

approx. 24 hours

1 measured by the testing machine Form + Test Seidner, Typ 502/3000/100SP
2 measured using: sound-resonance-analysis, RA100 Concrete, Lang Sensorik
3 measured using: test frame model No 2070, Zwick Roell (Toni Technik)

Documents/Downloads