NORTH AMERICA EN

Epoxy & Polyurethane
Liquid Systems

Best Results guaranteed.

Gelcoats

With their excellent mechanical and chemical properties, RAKU® TOOL gelcoats ensure a whole host of premium surface qualities.

A wide range of surface properties (rigid to flexible and abrasion resistant to polishable) can be obtained by applying just a thin layer.

The two-component epoxy systems and the polyurea system are available with both long and short pot lives and also with different degrees of temperature resistance.

RAKU® TOOL gelcoats are easy to apply and process.

Epoxy Systems

Density 1.4 g/cm3

RAKU® TOOL EG-2101 / EH-2950-1

Laminating resins

RAKU® TOOL laminating resins produce lightweight, rigid, and – depending on the type of fiber – high-strength molds and parts with or without gelcoat.

The portfolio includes solvent-free two-component epoxy systems with wide-ranging pot lives and degrees of temperature resistance for processing glass, carbon, and aramid fibers among others.

Impressive features of RAKU® TOOL laminating resins include their high strength, low odor, and excellent wetting properties.

The systems are ideal for manufacturing stable, lightweight parts, especially for the automotive, motor racing, marine, and the aviation industry.

Epoxy Systems

Density 1.1 / 1.17 g/cm3

RAKU® TOOL EL-2203 / EH-2952-1 / EH-2953-1

Density 1.0 g/cm3

RAKU® TOOL EL-2207-3 / EH-2907-3

Infusion systems

RAKU® TOOL infusion systems ensure optimum impregnation of dry fiber packages under pressure and in a vacuum.

A wide range of high-strength, solvent-free two-component epoxy systems with medium to high temperature resistance, excellent wetting, flow, and processing properties, and long pot lives are available.

RAKU® TOOL infusion systems are used especially for composites, producing extremely lightweight yet highly robust parts.

Epoxy Systems

Density 1.1 g/cm3

RAKU® TOOL EI-2507 / EH-2974

Density 1.1 g/cm3

RAKU® TOOL EL-2203 / EH-2970-1

Density 1.11 g/cm3

RAKU® TOOL EL-2203 / EH-2970

Density 1.20-1.25 g/cm3

RAKU® FST RI-5500 / RH-5900 / AC-9250

Density 1.20-1.25 g/cm3

RAKU® FST RI-5501 / RH-5900 / AC-9250

Density 1.2 g/cm3

RAKU® FST RI-5503 / RH-5903 / AC-9253

Density 1.2 g/cm3

RAKU® FST RI-5503-1 / RH-5903 / AC-9253

Casting resins

The RAKU® TOOL range of casting resins for both full and face casting includes epoxy, polyurethane, and polyurea systems.

These systems are available with varying degrees of temperature resistance and different pot lives. The latter can be adapted in some cases based on the hardener selected.

The resins have a number of impressive features, including good processing and venting properties, excellent resistance to chemicals, high resistance to abrasion, and a hard surface.

RAKU® TOOL casting resins are used for modeling in general and to make items such as foundry patterns and copy models, jigs and fixtures, and working models for the ceramics industry.

Full casting - the benefits: quick and easy work process, with no need for a gelcoat. It is suitable for smaller as well as larger castings.

Face casting – the benefits: a smaller amount of casting material is required, superior dimensional stability of the casting due to lower shrinkage, and special surface properties can be achieved (from flexible to hard). Face casting is suitable for large castings.

Epoxy Systems

Density 2.2 g/cm3

RAKU® TOOL EC-2402 / EH-2902-1

Density 2.4 g/cm3

RAKU® TOOL EC-2402 / EH-2904-1 / EH-2905-1 / EH-2906-1

Polyurethane Systems

Density 1.16 g/cm3

RAKU® TOOL PC-3432-1 / PH-3932-1

Density 1.2 g/cm3

RAKU® TOOL PC-3435 / PH-3935

Density 1.06 g/cm3

RAKU® TOOL PC-3436 / PH-3936

Density 1.18 g/cm3

RAKU® TOOL PC-3458 / PH-3958

Density 1.18 g/cm3

RAKU® TOOL PC-3459 / PH-3958

Fast cast resins

The range of RAKU® TOOL fast cast resins consists of two-component polyurethane systems that are used either filled or unfilled and can thus be cast in thin or thicker layers with various pot lives.

The resins are easy to mix and used to produce foundry models, core boxes, negatives, pattern plates, checking casts, copy models, vacuum forming molds, and jigs for trimming prototype parts.

RAKU® TOOL fast cast resins are sure to impress with their rapid cure and short demold times, excellent heat resistance, good moisture resistance as well as very high strength. They also allow for a high degree of filling.

Polyurethane Systems

Density 1.0-1.1 or 1.6-1.7 g/cm3 with filler

RAKU® TOOL PF-3701-2 / PH-3977

Bonding of lower density styling boards

RAKU® TOOL PF-3708 / PH-3978